論文

  • NAKAGAWA et al. (2018) 『Evaluation of Bearing Capacity of a Small-Diameter Spiral Pile Subjected to Combined Load Using Model Tests』

    Author(s): Shuhei NAKAGAWA,Ryo YAMAUCHI,Koichi ISOBE,Koichi TOMISAWA
     

    Key words:  spiral pile, bearing capacity, combined loading, loading test, FEM



     
    • 注文
    • 600円
    • 800円
  • PURNAMA et al. (2018) 『Effects of Grain Size and Density as Pre Bored Pile Filler Material on Bending Moment Due to Lateral Loading』

    Author(s): Adhitya Yoga PURNAMA,Noriyuki YASUFUKU,Ahmad RIFA’I
     

    Keywords: Pile foundation, Elastic-plastic behavior, Cyclic lateral loading, Pre-bored hole, Bending moment

    • 注文
    • 600円
    • 800円
  • TIKANTA et al. (2018) 『Experimental Study on Reinforcement of Existing Bridge Pile Foundations Subjected to Lowering of Riverbed Soil Using Sheet Pile Wall』

    Author(s): Tanatan Tikanta,Tatsunori Matsumoto,Anh-Tuan Vu,Shinya Shimono
     

    Key words: Reinforcement, Existing bridge, Pile foundation, Riverbed soil excavation, Model load test


    ​​​​​​​
    • 注文
    • 600円
    • 800円
  • DOUBROVSKY et al. (2018) 『Innovative Design and Technology Solutions for Development of Port and Offshore Pressed-in Piled Structures』

    Author(s): Michael DOUBROVSKY,Andrey GERASHCHENKO,Igor DOBROV,Olga DUBROVSKA
     

    Key words: Pressed-in Piles, Piled Cluster, Fender/Mooring Dolphin, Model Tests

    • 注文
    • 600円
    • 800円
  • KAWABATA et al. (2018) 『Bearing Capacity Recovery Rate of Square Steel Tubular Pipe Piles Based on Loading Test Results』

    Author(s): Noriyuki KAWABATA,Shinji NISHIMURA,Yutaka KUBO,Yukichi KANEHIRA
     
    Keywords: Steel pipe pile, Loading tests, Bearing capacity, Set-up rate, Construction control method

     
    • 注文
    • 600円
    • 800円
  • ZHUSSUPBEKOV et al. (2018) 『Application of Static Compression Load Test of Joint Piles in Seaport “Prorva” in the Caspian Sea Coastal Area (Western Kazakhstan)』

    Author(s): Askar ZHUSSUPBEKOV,Zhanbolat SHAKHMOV,Gulshat TLEULENOVA
     

    Key words: site, pile, SLT, bearing capacity, frost heavy


    ​​​​​​​
    • 注文
    • 600円
    • 800円
  • NOVELA et al. (2018) 『Centrifuge Modeling of Circular Sallow Foundation Reinforced with a Thin Sleeve』

    Author(s): Le Anh DUNG,Motohiro FUJIWARA,Mitsuhiro TSUCHIYA,Teijiro SAITO

    Key words: press-in with water jetting, pile loading test, frictional resistance, grouting
    • 注文
    • 600円
    • 800円
  • DUNG et al. (2018) 『The Countermeasure for Press-in Method on Lengthy SPSPs and the Confirmation of the Bearing Capacity Obtained by Pile Loading Test』

    Authors: Le Anh DUNG,Motohiro FUJIWARA,Mitsuhiro TSUCHIYA,Teijiro SAITO
     
    Key words: press-in with water jetting, pile loading test, frictional resistance, grouting
    • 注文
    • 600円
    • 800円
  • PANCHAL et al. (2018) 『Centrifuge Modelling of the the Influence of Size and Geometry of Hybrid Foundations on Bearing Capacity』

    Author(s):: J.P. PANCHAL,A.M. MCNAMARA,R.J. GOODEY
     

    Key words: Bored piles, Sheet piles, Re-use, Physical modelling, Sustainability

    • 注文
    • 600円
    • 800円
  • TODA et al. (2018) 『A Study on Bearing Capacity of Steel Sheet Pile with Closed Section at Bottom Supported in Intermediate Layer by Press-In Method』

    Author(s): Kazuhide TODA,Shinji TAENAKA,Hidetoshi NISHIOKA,Taisuke SANAGAWA,Naoyuki KITA,Kosuke MATSUURA
    • 注文
    • 600円
    • 800円
 






 
 
 
TOP