論文
-
K. Toda (2021) et al.『Comparison of SPT-based design methods for vertical capacity of piles installed by Rotary Cutting Press-in』
Author(s): K.Toda, Y. Ishihara, N.Suzuki[4.37 MB] -
T. Ozaki (2021) et al.『Proposal of vertical design bearing capacity estimation formula of Gyropress method based on Japanese railway standard』
Author(s): T. Ozaki, T. Sanagawa, K. Kimura, N.Suzuki[4.84 MB] -
L.T. Hoang (2021) et al.『Performance of pressed-in piles in saturated clayey ground: Experimental and numerical investigations』
Author(s): L.T. Hoang, X, Xiong, T. Matsumoto[7.49 MB] -
T. Zheng (2021) et al.『The vertical and horizontal performance of pressed-in sheet piles』
Author(s): T. Zheng, S.K. Haigh, A. Dobrisan, F. Willcocks, Y. Ishihara, K. Okada. M. Eguchi- 注文
-
600円
-
800円
-
H. Yamazaki (2021) et al.『The inner friction resistance and the resistance of an actual part of open-ended piles by the double-pipe model pile experiment』
Author(s): H. Yamazaki, S. Noda, M. Saotome, M. Nonaka[4.52 MB] -
K. Okada (2021) et al.『Results of static vertical load tests on tubular piles installed by Standard Press-in and Rotary Cutting Press-in』
Author(s): K. Okada, K. Inomata, Y.Ishihara[3.43 MB] -
M.P. Doubrovsky (2021) et al.『Study of bearing capacity of tubular piles with diaphragm under pressing loads』
Author(s): M.P. Doubrovsky, V.O. Dubravina[4.71 MB] -
F. Szymkiewicz (2021) et al.『Feedback on static axial pile load tests for better planning and analysis』
Author(s): F. Szymkiewicz, A. Le Kouby, T. Sanagawa, H. Nishioka[6.21 MB] -
A.J. Lutenegger (2021)『Influence of end geometry on aged behavior of segmental jacked pipe piles in clay』
Author(s): A. J. Lutenegger[4.35 MB] -
T. Iqbal (2021) et al.『Size effect of footing in ultimate bearing capacity of intermediate soil』
Author(s): T. Iqbal, S. Ohtsuka, Y. Fukumoto, K. Isobe[5.70 MB]
