論文

  • KUNASEGARAM et al. (2018) 『Stability of Self-Standing High Stiffness-Steel Pipe Sheet Pile Walls Embedded in Soft Rocks』

    Author(s): Vijayakanthan KUNASEGARAM,Jiro TAKEMURA,Yoshiro ISHIHAMA,Yukihiro ISHIHARA
     

    Key words: Self-standing walls, Soft rock, Stability, Centrifuge model, Steel pipe piles

    [1.14 MB]
  • KUNASEGARAM et al. (2018) 『Behavior of a Large Diameter Piles Subjected to Moment and Lateral Loads』

    Author(s): Vijayakanthan KUNASEGARAM,Wei Hsuan HSIAO,Sakae SEKI,Jiro TAKEMURA
     

    Key words: Large diameter piles, Embedment depth, Soft rock, Dense sand, Centrifuge model, Cyclic lateral loads

    [1.49 MB]
  • SUZUKI et al. (2018) 『Study on the Horizontal Bearing Performance of Steel Tubular Piles Installed by the Gyropress Method and the Press-in Method Assisted with Water Jetting』

    Author(s): Naoki SUZUKI,Yasumasa KIMURA

    Key words: Horizontal subgrade reaction, Rotary press-in, Water jet system, Horizontal loading tests, Steel tubular pile
    [0.76 MB]
  • NAKAGAWA et al. (2018) 『Evaluation of Bearing Capacity of a Small-Diameter Spiral Pile Subjected to Combined Load Using Model Tests』

    Author(s): Shuhei NAKAGAWA,Ryo YAMAUCHI,Koichi ISOBE,Koichi TOMISAWA
     

    Key words:  spiral pile, bearing capacity, combined loading, loading test, FEM


     
    [0.72 MB]
  • PURNAMA et al. (2018) 『Effects of Grain Size and Density as Pre Bored Pile Filler Material on Bending Moment Due to Lateral Loading』

    Author(s): Adhitya Yoga PURNAMA,Noriyuki YASUFUKU,Ahmad RIFA’I
     

    Keywords: Pile foundation, Elastic-plastic behavior, Cyclic lateral loading, Pre-bored hole, Bending moment

    [0.73 MB]
  • TIKANTA et al. (2018) 『Experimental Study on Reinforcement of Existing Bridge Pile Foundations Subjected to Lowering of Riverbed Soil Using Sheet Pile Wall』

    Author(s): Tanatan Tikanta,Tatsunori Matsumoto,Anh-Tuan Vu,Shinya Shimono
     

    Key words: Reinforcement, Existing bridge, Pile foundation, Riverbed soil excavation, Model load test

    [0.85 MB]
  • DOUBROVSKY et al. (2018) 『Innovative Design and Technology Solutions for Development of Port and Offshore Pressed-in Piled Structures』

    Author(s): Michael DOUBROVSKY,Andrey GERASHCHENKO,Igor DOBROV,Olga DUBROVSKA
     

    Key words: Pressed-in Piles, Piled Cluster, Fender/Mooring Dolphin, Model Tests

    [0.97 MB]
  • KAWABATA et al. (2018) 『Bearing Capacity Recovery Rate of Square Steel Tubular Pipe Piles Based on Loading Test Results』

    Author(s): Noriyuki KAWABATA,Shinji NISHIMURA,Yutaka KUBO,Yukichi KANEHIRA
     
    Keywords: Steel pipe pile, Loading tests, Bearing capacity, Set-up rate, Construction control method
    [0.87 MB]
  • ZHUSSUPBEKOV et al. (2018) 『Application of Static Compression Load Test of Joint Piles in Seaport “Prorva” in the Caspian Sea Coastal Area (Western Kazakhstan)』

    Author(s): Askar ZHUSSUPBEKOV,Zhanbolat SHAKHMOV,Gulshat TLEULENOVA
     

    Key words: site, pile, SLT, bearing capacity, frost heavy

    [0.42 MB]
  • NOVELA et al. (2018) 『Centrifuge Modeling of Circular Sallow Foundation Reinforced with a Thin Sleeve』

    Author(s): Hercio NOVELA,Shohei FUJITA,Suguru FUKUTA,Yuki TAKATSUJI,Katsutoshi UENO

    Key words: Shallow foundation, Sleeve foundation, Bearing capacity, Reinforcement, Centrifuge model tes
    [0.64 MB]
 






 
 
TOP