論文

  • DUNG et al. (2018) 『The Countermeasure for Press-in Method on Lengthy SPSPs and the Confirmation of the Bearing Capacity Obtained by Pile Loading Test』

    Authors: Le Anh DUNG,Motohiro FUJIWARA,Mitsuhiro TSUCHIYA,Teijiro SAITO
     
    Key words: press-in with water jetting, pile loading test, frictional resistance, grouting
    [1.39 MB]
  • PANCHAL et al. (2018) 『Centrifuge Modelling of the the Influence of Size and Geometry of Hybrid Foundations on Bearing Capacity』

    Author(s):: J.P. PANCHAL,A.M. MCNAMARA,R.J. GOODEY
     

    Key words: Bored piles, Sheet piles, Re-use, Physical modelling, Sustainability

    [0.65 MB]
  • TODA et al. (2018) 『A Study on Bearing Capacity of Steel Sheet Pile with Closed Section at Bottom Supported in Intermediate Layer by Press-In Method』

    Author(s): Kazuhide TODA,Shinji TAENAKA,Hidetoshi NISHIOKA,Taisuke SANAGAWA,Naoyuki KITA,Kosuke MATSUURA
    [0.70 MB]
  • ISHIHARA et al. (2018) 『Cambridge-Giken Collaborative Working on Pile-soil Interaction Mechanisms』

    Author(s):Yukihiro ISHIHARA, Stuart HAIGH
     

    Key words: Pressed-in pile, Press-in piling data, Sheet pile wall

    [2.89 MB]
  • SHIMADA (2018) State-of-the-Art Construction Sites Realized with ICT Construction Machines

    Author(s): Kenjiro SHIMADA


    Key words: ICT Construction Machine, Machine Control, Machine Guidance, Bulldozer, Hydraulic Excavator

    [1.22 MB]
  • IMAMURA (2018) Lessons of the 2011 Tohoku earthquake and tsunami with low frequency and high impact and developing numerical modeling for future disaster risk reduction

    Author(s): Fumihiko IMAMURA
    Director of International Research Institute of Disaster Science and Prof. of Tsunami Engineering, Tohoku University, Japan
    [0.81 MB]
 






 
 
TOP