論文
-
PURNAMA et al. (2018) 『Effects of Grain Size and Density as Pre Bored Pile Filler Material on Bending Moment Due to Lateral Loading』
Author(s): Adhitya Yoga PURNAMA,Noriyuki YASUFUKU,Ahmad RIFA’I
Keywords: Pile foundation, Elastic-plastic behavior, Cyclic lateral loading, Pre-bored hole, Bending moment
[0.73 MB] -
TIKANTA et al. (2018) 『Experimental Study on Reinforcement of Existing Bridge Pile Foundations Subjected to Lowering of Riverbed Soil Using Sheet Pile Wall』
Author(s): Tanatan Tikanta,Tatsunori Matsumoto,Anh-Tuan Vu,Shinya Shimono
Key words: Reinforcement, Existing bridge, Pile foundation, Riverbed soil excavation, Model load test
[0.85 MB] -
DOUBROVSKY et al. (2018) 『Innovative Design and Technology Solutions for Development of Port and Offshore Pressed-in Piled Structures』
Author(s): Michael DOUBROVSKY,Andrey GERASHCHENKO,Igor DOBROV,Olga DUBROVSKA
Key words: Pressed-in Piles, Piled Cluster, Fender/Mooring Dolphin, Model Tests
[0.97 MB] -
KAWABATA et al. (2018) 『Bearing Capacity Recovery Rate of Square Steel Tubular Pipe Piles Based on Loading Test Results』
Author(s): Noriyuki KAWABATA,Shinji NISHIMURA,Yutaka KUBO,Yukichi KANEHIRA
Keywords: Steel pipe pile, Loading tests, Bearing capacity, Set-up rate, Construction control method[0.87 MB] -
ZHUSSUPBEKOV et al. (2018) 『Application of Static Compression Load Test of Joint Piles in Seaport “Prorva” in the Caspian Sea Coastal Area (Western Kazakhstan)』
Author(s): Askar ZHUSSUPBEKOV,Zhanbolat SHAKHMOV,Gulshat TLEULENOVA
Key words: site, pile, SLT, bearing capacity, frost heavy
[0.42 MB] -
NOVELA et al. (2018) 『Centrifuge Modeling of Circular Sallow Foundation Reinforced with a Thin Sleeve』
Author(s): Hercio NOVELA,Shohei FUJITA,Suguru FUKUTA,Yuki TAKATSUJI,Katsutoshi UENO
Key words: Shallow foundation, Sleeve foundation, Bearing capacity, Reinforcement, Centrifuge model tes[0.64 MB] -
DUNG et al. (2018) 『The Countermeasure for Press-in Method on Lengthy SPSPs and the Confirmation of the Bearing Capacity Obtained by Pile Loading Test』
Authors: Le Anh DUNG,Motohiro FUJIWARA,Mitsuhiro TSUCHIYA,Teijiro SAITO
Key words: press-in with water jetting, pile loading test, frictional resistance, grouting[1.39 MB] -
PANCHAL et al. (2018) 『Centrifuge Modelling of the the Influence of Size and Geometry of Hybrid Foundations on Bearing Capacity』
Author(s):: J.P. PANCHAL,A.M. MCNAMARA,R.J. GOODEY
Key words: Bored piles, Sheet piles, Re-use, Physical modelling, Sustainability
[0.65 MB] -
TODA et al. (2018) 『A Study on Bearing Capacity of Steel Sheet Pile with Closed Section at Bottom Supported in Intermediate Layer by Press-In Method』
Author(s): Kazuhide TODA,Shinji TAENAKA,Hidetoshi NISHIOKA,Taisuke SANAGAWA,Naoyuki KITA,Kosuke MATSUURA[0.70 MB] -
ISHIHARA et al. (2018) 『Cambridge-Giken Collaborative Working on Pile-soil Interaction Mechanisms』
Author(s):Yukihiro ISHIHARA, Stuart HAIGH
Key words: Pressed-in pile, Press-in piling data, Sheet pile wall
[2.89 MB]
